Ferrari 360 Crankshaft Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this spacer to allow rotating the engine with the crankshaft pulley removed during the belt change procedure.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 130
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Use this crankshaft spacer after removing the crankshaft pulley to turn the engine with a ratchet. Unlike the spacer described in the workshop manual, this one slips onto the crankshaft and locks into the key. The outside of the spacer is shaped to allow a 1-½" 12 point socket to fit snugly over it so the crankshaft pulley bolt can be left off. In addition, this spacer will allow the ratchet and socket to fit a lot closer to the engine, allowing more room to work. Finally, this spacer, or really, a socket insert, is about 3 cm long and the socket can easily hang on it, as opposed to the bolt which has a short head and is cumbersome to turn with the large 36mm socket.
Version two released. Stronger, fits tighter.
I wrote an article on my blog with further information: https://www.ferrari360.org/2023/08/ferrari-360-crankshaft-spacer.html