Search results: crankshaft

Counting matching models…

Printables

50cc piston and crankshaft

One to one piston and crankshaft with moving components.

Printables

The crankshaft is a key element of the crank mechanism in an internal combustion engine, which converts the reciprocating motion of the pistons into rotational motion. It is a long shaft with many cranks (cranks) to which connecting rods…

Order a print of this model

Printables

BMW Crankshaft Pulley Socket (S54, B58, S65, S85)

Tool used to turn over the engine when doing timing on older BMW engines, or newer engines that are missing the integrated adapter. I might design a version that uses metal inserts or something to strengthen the holes, but worked for me.…

Order a print of this model

Printables

Austreiber Kurbelwellenlager KTM 690 - Crankshaft bearing extractor KTM 690

Falls euch wie mir der Lagerring zum austreiben des Kurbelwellenlagers bei der KTM 690 fehlt. Der Aufsatz verhindert das die Walzen beim ausschlagen aus dem Lager fallen. Mit einem entsprechenden großflächigem Aufsatz kann es nun aus dem…

Order a print of this model

Printables

Renault Crankshaft Front Oil seal Mandrel

Renault K4M, K7M and derivatives engines do not have a stop for the front crankshaft oil seal (7700273776 is the size of the oil seal 35*47*6 ). This mandrel is made in size from sources on the Internet and personal measurements. Tested…

Order a print of this model

Printables

Bicycle Crankshaft Cover

Cover for a crankshaft on a bike. I made this one specifically for an Olmo Champion Gran Prix. Check the dimensions in the image to make sure it will fit for you. Modify the .f3d to suit your needs.

Order a print of this model

Printables

Modified CrankShaft to prevent handle from falling off

Modified the crank shaft to allow a pin to hold the handle on.

Order a print of this model

Printables

FAUX-PRO 16300 Crankshaft Repair Sleeve Tool

This is a 3D-printable version of the FEL-PRO 16300 crankshaft sleeve installation tool. Used to install the FEL-PRO 16250 crankshaft rear main seal sleeve on engines like the legendary pushrod 5.0L Ford V8 (among others). The center is…

Order a print of this model

Printables

Honda CRV RD1 Front Main Seal/Crankshaft Seal Driver

Front Main Seal/Crankshaft Seal Driver for the first generation Honda CRV RD1. Printed in 3 parts so you don't need supports. Part 1 and 2 lock into each other and then part 3 is slid into part 2. You can use something to tap part 3 down…

Order a print of this model

Printables

A stand for supporting your Crankshafts by the main journals when stored horizontally

Crankshafts can warp while being stored horizontally, print one of these for each main journal & store them safely.

Order a print of this model

Printables

Simple crankshaft mechanism - working

By accident created a nice little crankshaft mechanism. With very little cleanup, mostly the brim, and a careful rotation of the parts, it works. It is one print, no support material or anything else.

Order a print of this model

Printables

Crankshaft

Use as an educational tool, display piece, or decoration.

Order a print of this model

Printables

GM Ecotec Front Crankshaft seal tool

Do you hate having to use a hammer and an expensive special tool to install a front crankshaft seal (Front main seal)? Simply put the new seal on the tool and use the harmonic balancer bolt to press the seal into place. Print with a high…

Order a print of this model

Printables

crankshaft plug YAMAHA XT 600

Crankshaft plug on the timing side YAMAHA XT 600. he most suitable printing material is Prusament PC Blend, I have tested it for 2 years of riding, I leave the mtrial link…

Order a print of this model

Printables

VW T40058 Crankshaft Turning Socket Tool

Camshaft Key Assembly Crankshaft Pulley Tool I suggest ABS and 100% infill to make it strong.

Order a print of this model

Printables

Lego Compatible (2854.dat) Technic Engine Crankshaft Centre

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (2853.dat) Technic Engine Crankshaft

This model is compatible with the lego system.

Order a print of this model

Printables

4-cylinder crankshaft

A 4-cylinder crankshaft is a vital engine component that transforms the pistons’ linear motion into rotational motion, driving the vehicle’s power output. It contains four crankpins, each linked to a piston through connecting rods, and…

Order a print of this model

Printables

50cc piston and crankshaft

One to one piston and crankshaft with moving components.

Order a print of this model

Printables

Crankshaft pulley for drive belt for snow blower (Шкив коленвала ремня привода хода для снегоуборщика)

APEK-AS 56 ME Pro Line, 6501 Pro Line, CHAMPION ST553, ST661. Part Number: KCM22B-02-17

Order a print of this model

Printables

Crankshaft Febi Bilstein seal installation tool for PSA 1.4/1.6 HDI engine

It was printed on a I3 MK3 with Prusament PLA 0.3mm draft. Perimeters vertical and horizontal shells : 4. Infill : Honeycomb 15%. Auto generated support. To make this tool operational, you will need a M8 bolt long enough, a pile of washer…

Order a print of this model

Printables

Shiatsu Machine Crankshaft

It fits perfectly, however I don't recommend PLA as it isnt strong enough.

Order a print of this model

Printables

B230 Crankshaft Pulley Holder Tool

B230 Crankshaft Pulley Holder Tool Just a template for custom metal processing, fitting well...

Order a print of this model

Printables

crankshaft

Order a print of this model

Printables

Dial indicator holders and Crankshaft jig for Honda NSR 125 gatito approved

Just a quick crank jig, i made the Spacer and Reducer specifically to true a NSR125 crankshaft. i made the dimensions quite generous for bigger bikes in the future. it mounts to the bed of my mill, and i used a dial indicator holder to…

Order a print of this model

Printables

Dial indicator holders and Crankshaft jig for Honda NSR 125 gatito approved

Order a print of this model

Printables

Crankshaft Socket for Honda/Acura K20 and K24 Engine

Designed this socket to use a 1/2" drive tool to spin a Honda K20 or K24 engine over with no crank pulley bolt. This model uses the factory crankshaft key to function, so one of those will be required. Printed with a .4mm nozzle, .24mm…

Order a print of this model

Printables

Wagner 130 Piston Crankshaft Connector

Replacement part for connecting the piston to the crank shaft cam on a Wagner 130 paint sprayer. My was broken and this replaced it. Printed in PC with 6 walls and 40% infill.

Order a print of this model

Printables

Front crankshaft seal driver for 2010 Honda Insight

A tool to drive in a front crankshaft seal (don't get Timken, they will go in cock-eyed) 55x40x7 seal, chamfered entry

Order a print of this model

Printables

Lego piece 2854 (crankshaft piece)

Printed with PETG, nozzle temp: 240, bed temp: 90, recommend printing with supports so that the axle holes are vertical.

Order a print of this model

Printables

Crankshaft clamp for OS 91/105HZ engines

Crankshaft clamp needed to lock the shaft of RC nitro engines when tightening up the clutch nut. This one fits O.S. engines: GT15, 105HZ, 91HZ / SZ / RZ (including R versions, i.e. HZ-R). Replacement for genuine O.S. crankshaft clamp part…

Order a print of this model

Printables

lego crankshaft for 3 cylinder engines (120°)

With this custom 120° crankshaft you can build a straight 3 cylinder or a V6 engine with an even firing order. for a complete crankshaft you need 3 custom 120° crankshaft pieces and 3 regular crankshaft pieces which you can download…

Order a print of this model

Printables

Ferrari 360 Crankshaft Locking Tool (Ferrari tool # AV 3207)

This crankshaft locking tool allows loosening and torquing of the crankshaft pulley bolt at the front of the engine. This bolt needs to be removed to perform the belt service. This tool should be printed with thick walls and at least 80%…

Order a print of this model

Printables

Ferrari 360 Crankshaft Spacer

Use this crankshaft spacer after removing the crankshaft pulley to turn the engine with a ratchet. Unlike the spacer described in the workshop manual, this one slips onto the crankshaft and locks into the key. The outside of the spacer is…

Order a print of this model

Printables

BOSCH ART 37 GRASS TRIMMER CRANKSHAFT COUPLING SPARE PART

The original coupling broke (ivory in the photo). I made it from PLA+ (light blue in the photo) - it lasted for 20 minutes of work, melted and fell apart. Made from PETG (white in the photo). After an hour of work, I disassembled the…

Order a print of this model

Printables

Crankshaft balancer

Choose between single-piece or multiple-piece design. I recommend the multiple-piece design because you can print it laying on bed and thus get more precise dimensions of the bearing faces. You will need 8pcs of 3X10X4mm bearings (4pcs…

Order a print of this model

Printables

Piaggio Ciao Crankshaft Seal Montage Tool, Bravo,Ciao, Si, Boxer, Grillo, Boss, Moped 15x24x5mm

Montage Seal Tool For Piaggio Moped Engines (flywheel side) The engine gasket sealant installation tool for Piaggio Ciao is a valuable tool designed to facilitate the installation of engine gaskets with consistent pressure distribution.…

Order a print of this model

Printables

crankshaft seal Tool puig engine

picture as example

Order a print of this model

Printables

BMW R90S Crankshaft key ring

I present the scale model of the crankshaft of a BMW R90S. In order to make the key ring more compact, have been removed the part of the shaft that go to the drivetrain and the oil pump. For its printing, I suggest a height of 0.15 mm,…

Order a print of this model

Printables

The Crankshaft

Order a print of this model

Printables

DRZ400 crankshaft balancing stand

Print the top near where the skate bearings mount with a modifier and 100% infill. The first balancing stand is actually untested, the 2nd balancing stand is tested, but if you push it the wrong way, without a lot of infill, it affects…

Order a print of this model

Printables

Crankshaft Degree Wheel with hub for 4G63

360 degree wheel. Bolts onto either the harmonic balancer in car of a 4G63 or the crank sprocket using the harmonic balancer bolts. To install, attatch the hub to the car, then slide up the wheel and align it to the hub. Using 2 interior…