Glass Block Window Ventilation Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for a standard glass block window to allow you to connect 4" ducting for ventilation
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 121
- Makes
- 0
- Views
- 833
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This is an adapter I designed out of necessity, as my new office only has glass block windows and I needed a way to vent my resin setup. It should fit over most glass block windows, and allow you to still open and close the window if needed.
You need to print the “Vent Top” and “Vent Base” parts twice, and the “Duct Connector” once. You then secure the base together first, the the top to the base, then the duct connector to the entire assembly. You should use M3x10 screws and nuts.
If you want to go all out, you can use some caulk around where the pieces come together to get an airtight seal.
I'd recommend using a short amount of ducting from this assembly, connected to your main ventilation input via this great twist lock connector - this way, you can get to the assembly easily if necessary.
Happy printing!