LayersFactory
Report model
1 / 7
Corner GoPro Compatible Mount for Original Prusa Enclosure OPE — image 1
1 / 7

Corner GoPro Compatible Mount for Original Prusa Enclosure OPE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

6d6178

6d6178

@6d6178

A GoPro compatible mount that can be installed in the panel corners of the Prusa Original Enclosure

Rating
5 / 5
Likes
40
Downloads
137
Makes
1
Views
822
Reviews
1

Updated at source:

Model information

Source
Printables
Category
Prusa Parts & Upgrades
License
Creative Commons — Attribution
DetailsFiles (9)Makes & comments (Makes: 1) (Comments: 3)Remixes (0)Collections (82)Related

This is a GoPro-compatible mount that can be installed in 15 different panel corners on the Original Prusa Enclosure.

For compatible thumb screws and arms check out the Modular Mounting System Arms. Any GoPro-compatible knob will work though.

Note: This model was created for a Prusa Enclosure Modifications contest submission.
I don't own a Prusa Enclosure and haven't been able to test a real-world installation. However, I've tested the part for printability and fit of the hex nuts. This model is based entirely on measurements taken from the CAD file of the enclosure. Please provide feedback about the fit if you try it.

 

Mounting Options

The mount can be installed in up to 15 different locations on the enclosure, depending on which other add-ons and accessories you have installed. Use multiple mounts to add spot lights, cameras, etc. in all possible angles.

 

Versions

There are two versions with the knob either on the left or on the right. Choose the version that's easier for you to adjust when reaching inside the enclosure.

And there are two versions for different panel thicknesses. Use the 1.5mm version for window panels, bottom, and back panels. Use the 1mm version for the top panel.

 

Required Hardware

Qty

Part

Sourcing

2

M3x8mm Socket Head or Button Head Cap Screw 

Aliexpress

2

M3 DIN934 Hex Nut 

Aliexpress

1

M5 DIN934 Hex Nut **

Aliexpress

** Don't use Nyloc nuts. Shear forces induced during unscrewing when using Nyloc nuts can lead to layer delamination.

 

Printing

Print the part in the original orientation. The STL file is pre-rotated for printing.

  • Material: ASA, ABS, PETG, etc. (material must withstand temps inside enclosure)

  • Extrusion width: 0.45mm

  • Layer height: 0.2mm

  • Perimeters: 4

  • Infill: 15%

  • Supports: No

 

Installation

  1. Insert the M3 hex nuts into the printed part.

  2. Place the part over the holes of the desired panel corner with the GoPro mount facing inward.

  3. Fasten the part with the M3x8mm screws from outside the enclosure.

 

Additional Credits

Tags

prusagoproenclosuregopromountprusaenclosuremodularmountmodularmountsystem6d6178modularmountingsystemoriginalprusaenclosureope