Expandable Sheetholder for Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A storage space for the metal sheets ontop of the Prusa Enclosure
- Rating
- 3 / 5
- Likes
- 100
- Downloads
- 141
- Makes
- 1
- Views
- 2,299
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Whity's model to fit ontop of the Prusa Enclosure.
Printer settings
Printed with 0.2 layer hight and 20% infill. Support is only needed for the bottom parts
The sheetholder bottom parts are designed to put in 5x5x2 magnets to stick better to the top of the enclosure. The magnets must be inserted while printing.
Assembly instructions
First remove the middle cover in the top metalplate of the enclosure by removing the nylon rivets.
Than put in the two printed bracket parts in the hole and secure them with the two nylon rivets you removed in the step before.
The left bottom part is secured with a M3x8 countersunk screw. It replaces the M3x5 hex screw far left in the upper frame of the enclosure.
The right bottom part is secured with a M3x12 hex screw. It replaces the M3x5 hex screw on the far right in the upper frame of the enclosure.
After the bottom parts are installed you can stack multiple of Whity's sheetholders ontop of each other.
