1 / 2
Skadis Cat6 Network Cable Holders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holders for neatly running Cat6 (6.5 mm diameter) network cables on IKEA Skadis pegboards.
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 224
- Makes
- 1
- Views
- 1,640
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Holders for neatly running Cat6 (6.5 mm diameter) network cables on IKEA Skadis pegboards.
There are a few variants available:
- Horizontal for running cables horizontally
- Vertical for running cables vertically
- Vertical narrow, 11 mm c.t.c. instead of 15.7 mm
- Thinner, with “base plates” 3 mm thick instead of 5 mm. The 5 mm is for better aligning with ports on equipment; the thinner versions should make the horizontal holders easier to wrangle into place.
Please be advised that the normal 5 mm base plate horizontal holders — despite the chamfered hook — may be difficult to install and probably worse to remove, the 4x version in particular as it extends above the hook. For the 4x version I suggest putting a piece of paper between the top part of the base plate and your Skadis board during installation to avoid scratches to the board.