Electric Junction box fot 16mm or 7mm sleeving.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi everyone, I needed a simple junction box for my shop refit. I have 16mm sleeving actually and I want to use some…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 0
- Views
- 507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everyone,
I needed a simple junction box for my shop refit. I have 16mm sleeving actually and I want to use some 7mm 2p+T cable. I use standard EU style 18mm dominos as terminal. The junction box is meant to be wall mounted, and wires and sleeving will be hold in place by 2x1mm zip ties. The wall of the box are embed into the lid to allow easy access to the cables and terminal (hate to dig with my fingers to get cables lying at the bottom of an always too deep box). Two plastic screws keeps the lid on.
PRINTED PARTS :
1x Base Plate
1x Lid
?x 7mm plug (to close unused pass-thru)
?x 16mm plug (to close unused pass-thru)
BOM :
6x 2x1mm Zip Ties to secure wires, sleeving or plugs
4x 4mm countersink screws to secure the box on the wall
2x 3x12mm hex socket plastic screws to secure the lid.
2x 3x10mm hex socket plastic screws to secure the terminal
1x 5U 18mm domino terminal
I hope you guys enjoy this.
Print Settings
Printer:
HE3D Tarantula
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
80% Linear
Filament:
eSUN ABSWhite
Notes:
The raft prevent warping.
Category: Replacement Parts