Desk Organizer with Clock (and Calendar)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.09 net (excluding VAT)
For file: Desk_Organizer_Clock__Hand_Hour_0.4n_0.1mm_PLA_MK4_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.08 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Desk organizer with clock, calendar, pen holder and compartments for paper clips and small notepads.
- Rating
- 5 / 5
- Likes
- 108
- Downloads
- 302
- Makes
- 3
- Views
- 2,430
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This desk organizer includes a clock, calendar, pen holder, and compartments for paper clips and small notepads. Notepads with a size of 90 mm x 90 mm can be inserted. Instead of a calendar, a nice picture could also be used, for example. In addition to the organizer with slots for the calendar, a 3D model without slots is also included.
The organizer has a size of about 168 mm x 95 mm x 117 mm (width x height x depth). Movements (clockworks) with a case size of 56 mm x 56 mm can be used.
Calendar
There are holders/slots on the desk organizer for, e.g., a small calendar. The attached PDF file (see Files) contains calendars for the year 2025 for the countries United Kingdom, USA and Germany. The calendar has a sheet size of 70 mm x 90 mm and contains 6 months of each calendar year. I recommend printing on thick paper.
Movement , Clock Hands and Dial
You can use any movement with a case size of 56 mm x 56 mm. I use the following movement: https://www.amazon.de/gp/product/B00TPI4FKE
You can use the clock hands from your movement or use (and modify) the 3D modeled clock hands (see Files). These hands can be customized if necessary using the included Fusion 360 project file. User parameters were used for this, which can be modified in Fusion via Modify ➝ Change Parameters. The following parameters (and default values) are used.
There are 3 different dial designs included in the files. The dial has a diameter of about 90 mm and a (total) thickness of 3.5 mm.
Printing
The dial of the clock is printed in 2 colors (e.g. black and white), so 1 color/filament change is required.
- 0.0 - 1.6 mm: color 1 (black)
- 1.6 - 2.6 mm: color 2 (white)
The color change using PrusaSlicer is described here: https://help.prusa3d.com/article/color-change_1687
A color change at the case of the desk organizer is optional.
Assembly
The case and dial are joined together with a little glue. There are 4 markings for the alignment of the dial. Then the movement and the clock hands can be installed.
My Print Settings
- Printer: Prusa MK4 (0.4 mm nozzle)
- Rafts: No
- Supports: Optional
- Resolution: 0.2 mm
- Infill: 15 %
- Filament brand: Prusament
- Filament color: Prusa Orange, Jet Black, White
- Filament material: PLA