"Chewey_GLK-17_Q1" Oculus Quest 1 VR pistol grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VR grips for Oculus Quest 1.
- Rating
- 0 / 5
- Likes
- 93
- Downloads
- 547
- Makes
- 0
- Views
- 4,426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT: This is just a model shell grip for a VR controller.
NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, see here.
Introducing the "Chewey_GLK-17_Q1"!
For more details, please refer to the Quest 2 version's descriptions.
The picture is from the Quest 2 version, however, everything is the same except for the sizing of the hollow to fit the respective controller.
In addition to the reference models I noted in the Quest 2 posting, this Quest 1 model also uses the 3D scanned controller image posted by user aolshove on Thingiverse.
Each hand controller needs:
- 1x Grip
- 1x Slide
- 1x Front lower
- 2x Screws
Assembly notes:
- One screw is used to join the Grip with the Front lower. These were separated for ease of printing.
- One screw is used on the side to secure the Slide in place in case it slips off while mid VR session.
NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand.
Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17_Q1" somewhere on the final design. Please do not monetize on this model. Thanks!
Print instructions
Layer height: 0.2
Infill: 15%
Support: see "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf"
Refer to "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf" for print orientation and paint on support using PrusaSlicer.
The grip and front lower should be the same color.