Print-In-Place Filament Filter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.70 – €0.85 net (excluding VAT)
For file: PiP Filament Filter_0.2mm_PLA_MINI_54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.77 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 54 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A print-in-place filament filter that hinges open/closed and has a slide locking mechanism.
- Rating
- 4.778 / 5
- Likes
- 93
- Downloads
- 585
- Makes
- 8
- Views
- 1,880
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A print-in-place filament filter that hinges open/closed and has a slide locking mechanism.
- No supports
- 0.2mm layer height
- 0.4mm nozzle
- 15% infill
- PLA
Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.