Band Saw Fence Indicator Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BAND SAW FENCE INDICATOR A replacement indicator for a bandsaw or other tool that has a similar guide. Simply screw it…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
BAND SAW FENCE INDICATOR
A replacement indicator for a band saw or other tool that has a similar guide. Simply screw it on with the screw that came with your bandsaw. I recommend a 20% infill. PLA is fine. PETG would be better on a heavily used bandsaw.
This was used to replace the indicator on my Craftsman 22400 bandsaw. The part JL20061008 is not made any more so i created a replacement. Use the dimensions to evaluate the possibility of this working on your saw -- perhaps with resizing on your bandsaw. I've also included the Fusion 360 Model if you want to customize it for your bandsaw. Check out the custom user parameters to get you started with basic measurements. There is a photo of the old part (JL20061008) to show you what this replaced.
The indicator has a slightly oval shape for the screw hole. This is so you can fine tune the accuracy. Set the blade a known distance from the fence. Then make sure that the indicator matches what is actually the distance. Once they are the same, screw it down tight.
Features
- Easy to use and adjust
- No assembly
- Simple and fast print
- Small ridge edge rides along fence to prevent it from sliding side to slide
- Resize with your slicer if desired!
- Dimensions: .78""w (20mm) x 1.65" l (42mm) Thickness 0.09 (2.18mm)
- Distance from Ridge To Screw hole middle 0.3" (7.75mm) Screw Opening 0.17" (4.3mm)
Category: Parts