KP3S PRO Display Frame with SD Card Slot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
display frame (TFT 24) with built-in microSD card slot on the front (SDcard extender)
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 74
- Makes
- 2
- Views
- 698
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
important !!! uncomment NO_SD_DETECT in Marlin otherwise with the extender will not work properly
configuration_adv.h
you will need 2x M3x10 mm with nut to screw the body to the base , 3mm x 5mm long screw to screw the display to the cover
Insert the SDcard extender into place (watch out for the two small tabs) and secure with a hot melt gun
ATTENTION !!! do not print the SDcard extender - the model is for measurement only :D
https://datoid.com/dOLPOz/robin-nano-bin
After loading the Marlin, you will need to do a PID calibration and extruder calibration as well as Linear Advance. The firmware includes everything but every printer is a bit different ... but it is possible that you will be comfortable with the FW setup. Have fun :)
!!! Please note that you install FW at your own risk , I take no responsibility !!!