KP3S PRO Display Frame with SD Card Slot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
display frame (TFT 24) with built-in microSD card slot on the front (SDcard extender)
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 698
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
important !!! uncomment NO_SD_DETECT in Marlin otherwise with the extender will not work properly
configuration_adv.h
you will need 2x M3x10 mm with nut to screw the body to the base , 3mm x 5mm long screw to screw the display to the cover
Insert the SDcard extender into place (watch out for the two small tabs) and secure with a hot melt gun
ATTENTION !!! do not print the SDcard extender - the model is for measurement only :D
https://datoid.com/dOLPOz/robin-nano-bin
After loading the Marlin, you will need to do a PID calibration and extruder calibration as well as Linear Advance. The firmware includes everything but every printer is a bit different ... but it is possible that you will be comfortable with the FW setup. Have fun :)
!!! Please note that you install FW at your own risk , I take no responsibility !!!