Magnetically attached neck and base for Full Sized Voronoi Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A neck/base for a full sized head to be mounted on a mannequin (for example)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 54
- Makes
- 0
- Views
- 628
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork.
I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the bottom of the head model and designed a neck, both held together by two strong round magnets (32x3mm). This way you can turn the head or take it off if needed. The parts painted in red in the rendering are the newly designed parts.
I publish this design on demand by Dinalab though it primarily just was meant for my wife’s hobby.
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra