GridFinity Film Canister Pack for Photographers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handy collection of GridFinity compatible film canister storage system
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 276
- Makes
- 2
- Views
- 995
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About the Film Canister Holder:
This is a simple remix of the base Gridfinity template adjusted to fit very precisely most common film photography canisters.
Sizes:
The hole is 32mm to best fits film canisters of 31mm of diameter (most of the classic ones).
However if you find it to tight for your canisters, check out this model by Ragepyro which is a bit wider at 36mm.
The height of the Gridfinity block is of 1 unit.
Variations:
- 1x1
- 1x4
- 2x2
- 2x4
How to print:
I recommend a 0.4mm nozzle with any filament of your choice. I used Basic PLA for this with layer height of 0.2mm.
The Gridfinity model I'm based on does not require any support to be printed (on the magnet holes mainly)
Feel free to give feedback so I can improve my models!
Happy photoshoots!