1 / 3
Vacuum cable clip (parametric)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can find the Fusion 360 file to change the model according to your vacuum hose.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 140
- Makes
- 1
- Views
- 560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
You can find the Fusion 360 file to change the model according to your vacuum hose.
I already setup some parameter for ease of use.
I also exported what I believe are standard hose diameter clips (cable diameter is 8.5mm on both) :
- Vacuum cable clip d27 : inside diameter 27mm, outside diameter 35mm (I believe it is a Festool standard)
- Vacuum cable clip d35 : inside diameter 35mm, outside diameter 42mm (tested on my Karcher WD3 premium and it fits perfectly)
If you have other dimensions suggestions don't hesitate to ask !
Print Settings
Supports: No
Resolution: .28mm
Infill: 20%
Filament: Dailyfil PETG Black
Notes:
You can had 2 tabs at the end of the clip to secure the first layer. I did that and never had a problem.
The clip takes approximatively 25min to print.