Vacuum cable clip (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can find the Fusion 360 file to change the model according to your vacuum hose.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
You can find the Fusion 360 file to change the model according to your vacuum hose.
I already setup some parameter for ease of use.
I also exported what I believe are standard hose diameter clips (cable diameter is 8.5mm on both) :
- Vacuum cable clip d27 : inside diameter 27mm, outside diameter 35mm (I believe it is a Festool standard)
- Vacuum cable clip d35 : inside diameter 35mm, outside diameter 42mm (tested on my Karcher WD3 premium and it fits perfectly)
If you have other dimensions suggestions don't hesitate to ask !
Print Settings
Supports: No
Resolution: .28mm
Infill: 20%
Filament: Dailyfil PETG Black
Notes:
You can had 2 tabs at the end of the clip to secure the first layer. I did that and never had a problem.
The clip takes approximatively 25min to print.