1 / 2
Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23) — image 1
1 / 2

Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.24 – €0.30 net (excluding VAT)

For file: Spigen SM_0.1mm_PETG_MK3S_20m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.27 excluding VAT (range midpoint).

Weight reported by the author
2 g
Print time reported by the author
20.4 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Replacement Sliding Cover with window for flashlight. Compatible with Spigen Optik Armor for Samsung Galaxy S23.

Rating
0 / 5
Likes
13
Downloads
40
Makes
0
Views
660
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover.

To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight.
The flashlight is covered with 0.3mm material, if printed in white it will shine through without any problems.

I have uploaded two variants:

  • SM: print from a single bright material
  • MM: print of the window from one bright material and the rest from another material

The MM variant has a slightly different design because an area of 25x25mm was reserved for a QR code.

The 1st layer was printed from 100% perimeters only for optical reasons.

The part has very tight tolerances and requires good printer calibration.
The support material required different settings from the original Prusa profiles, see 3MF file.

 

Tags