1 / 2
Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23) — zdjęcie 1
1 / 2

Sliding Cover for Spigen Optik Armor (Samsung Galaxy S23)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,24 € – 0,30 € netto (bez VAT)

Dla pliku: Spigen SM_0.1mm_PETG_MK3S_20m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,27 € netto (środek widełek).

Masa podana przez autora
2 g
Czas druku podany przez autora
20,4 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Replacement Sliding Cover with window for flashlight. Compatible with Spigen Optik Armor for Samsung Galaxy S23.

Ocena
0 / 5
Polubienia
13
Pobrania
40
Wydruki
0
Wyświetlenia
660
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover.

To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight.
The flashlight is covered with 0.3mm material, if printed in white it will shine through without any problems.

I have uploaded two variants:

  • SM: print from a single bright material
  • MM: print of the window from one bright material and the rest from another material

The MM variant has a slightly different design because an area of 25x25mm was reserved for a QR code.

The 1st layer was printed from 100% perimeters only for optical reasons.

The part has very tight tolerances and requires good printer calibration.
The support material required different settings from the original Prusa profiles, see 3MF file.

 

Tagi