Flowmeter with ESP82 and OLED display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
STL are to build a case for ESP8266 combined with OLED display 128X34. I use with pulse flowmeter for water…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 54
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
STL are to build a case for ESP8266 combined with OLED display 128X34.
I use with pulse flowmeter for water consumption.
Here the link :
*OLED 0.96inch : https://www.aliexpress.us/item/3256801435523683.html?spm=a2g0o.order_list.order_list_main.29.671a1802w9Vzmh&gatewayAdapt=glo2usa4itemAdapt
The display is attached to front cover with 4 pins , which are melted with soldering iron after diplay has been placed.
The ESP board is mounted on two pillars, which slightly grasp the side pins. Hot glue is applied on top of the pillars and in both corners to secure the board in place.
2 grooves have been made to place zip tie, allowing to fasten the box whereever necessary.
This small box is not ideal and could benefit from some improvements, but it may still be useful to you.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV01PRO
Rafts:
No
Supports:
No
Resolution:
0,16
Infill:
10%
Filament:
No name PLA
Notes:
The orientation of each STL file needs to be adjusted so that they lie flat on the bench.
Category: Electronics