1 / 6
Simon27 Plug Cover Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the Simon27 plug cover easily with this model. Easy and fast to print.
- Rating
- 0 / 5
- Likes
- 62
- Downloads
- 106
- Makes
- 0
- Views
- 672
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
To replace the cover in poor condition, loosen the retaining screw and remove the old cover.
Keep the retaining screw for the new cover.
Place the new cover in the hole and tighten the retaining screw.
WARNING !!!
This model can cause damage if the correct material is not used for 3D printing, that is, material that is not flammable or not certified. You must use a non-flammable or certified filament to print this model.
The author is not responsible for any possible damages caused by not following the recommendations described.