Mayfly Slide Replacement With Fidlock Attachment Points
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Version of @Gemeneye_212233's Slide Replacement for the Mayfly with Fidlock stud attachment locations.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a version of @Gemeneye_212233's Slide Replacement/Stock Attachment for the Mayfly (Nerf Maverick flywheel conversion) with Fidlock stud attachment locations on the left hand side of the slide.
The studs are 60mm apart, and it is designed to use the medium size Fidlock studs/screws available from Out of Darts. While the conceptual usage is similar to the Hold-ster also available from them, it has not been tested for compatibility.
https://outofdarts.com/products/fidlock-snap-male-bolt-magnet-medium?variant=39742098440234
The studs are mounted at the same angle as the magwell is on the blaster, allowing the magazine to lie parallel to the leg when using a dropleg style holster. The holes are un-threaded so for now just use either a tap or an M5 bolt to cut threads into the model after printing).