1 / 4
Reinforced Creality K1 Side Spool Holder with Filament Guide - 2 Piece Print — image 1
1 / 4

Reinforced Creality K1 Side Spool Holder with Filament Guide - 2 Piece Print

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of the K1 Side Spool Holder to eliminate the sag while holding a spool.

Rating
4.882 / 5
Likes
190
Downloads
1,524
Makes
19
Views
8,149
Reviews
17

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Fellow Creality K1 Owners,

Yup, that's right! Yet another take on mounting both the spool holder on the side of the Creality K1. With the original, I noticed that the spool was sagging. So with this model it has 4 points of attachment to the K1. 

Printing:
     I printed with 4 walls (sides, top & bottom) with a 35% infill. You can probably get away with less infill but I always overprint structural items. 

Assembly:
     - You can simple place the two pieces together at the joint. I originally was thinking to glue or weld them together, but after installing there is no need. They fit nice and snug together.

     - To attach to the printer you'll need some longer M3 screws to replace the original screws holding the cover and side fan.  Remove the screws, and replace with the longer ones. This model, like the originals, uses the factory spool holder center.

Needed:
     x4 - M3x16 Screws

 

Thanks and happy printing!

Tags