Customizable Sieve with Dividers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sieve that can be customised and stacked. Great for filtering beads, seeds and anything else.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
READ PRINT INSTRUCTIONS
A customisable sieve with six sections that can be used to filter seeds, beads or anything you like.
Heights:
Perimeter 20 mm, dividers 15 mm (Small sieve is shorter at 15 and 10 mm).
Base is 2 mm thick
Diameters:
Small = 40 mm
Medium = 60 mm
Large = 80 mm
Print Instructions
- Choose sieve size.
- Set the print to have ZERO top and bottom solid layers. This is important or the base will be solid.
3. Choose infill pattern and density. Higher % infill = smaller holes.
Example shown in two tone green/blue PLA of a 60mm sieve, 0.6 nozzle, 040 mm layer height, 50% octagram spiral infill. 29 minute print time.
Other example is clear PETg of a large 80 mm sieve with 80% star infill
The dividers are 5 mm shorter than the perimiter to allow stacking, simply scale the consecutive prints by +/- 10% along both the x and y axis.
More Examples:
40 mm sieve, 40% octagram spiral infill
40 mm sieve, 80% star infill
80 mm sieve, 40 % grid infill
80 mm sieve, 60% grid infill