1 / 5
Sensor community (airRohr) case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the Sensor community (airRohr) project : https://sensor.community/en/sensors/airrohr/
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 138
- Makes
- 5
- Views
- 873
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
General description
This case is designed to contains the parts used in this kit: https://sensor.community/en/sensors/airrohr/
- NodeMCU v3 (ESP8266)
- sds011 particule sensor
- BME280 temperature sensor
This box is designed for outdoor use under shelter.
Outer dimensions: 155.2 x 92.2 x 34.4
Print instructions
- Use a PETG filament that is more resistant to outdoor conditions.
- No support required to print both parts.
Assembly instructions
- Connect all components together as described on https://sensor.community/en/sensors/airrohr/
- SDS011: Start by inserting the flexible tube into the circular hole and then clipping the SDS011 to the case (no screws required for assembly)
- NodeMCU: Clip the NodeMCU (no screws required for assembly)
- BME280: insert the bme280 into the slot:
- Cut the thin wall to let the usb cable pass through:
Remix Helper
To make remixing easier, the Fusion 360 f3d file is now available for download!