Prusa MINI LED Bar - no tools, no supports
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.75 – €2.14 net (excluding VAT)
For file: StepperLEDHalterShortWider_0.2mm_PETG_MINI_2h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.95 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.04 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
LED bar for the Prusa MINI, simple fits on the Z-Axis stepper, no tools needed.
- Rating
- 4.846 / 5
- Likes
- 81
- Downloads
- 305
- Makes
- 11
- Views
- 2,245
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
LED bar for the Prusa MINI, simple fits on the Z-Axis stepper, no tools needed.
There are two versions, one normal and one short to print on the MINI itself.
Print it upside-down. No supports needed then.
Cable/power-management:
I used the route of the Z-Axis stepper cable for the cable. As the mini has no handy options to add cables on the board, I've used an old 12V adapter to power the LEDs.
Print settings: default 0.2 quality profile of Prusa
- 0.2 layer height
- 20% infill, grid
- 3-4 bottom/top layers
- no supports
- PLA or PETG
Please leave a like/rate. =)