DIN Rail Mount for CANable Pro 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I couldn't find a rail mount for the Canable Pro 2.0, so I made one.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 110
- Makes
- 0
- Views
- 666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is for the new, updated version of the Makerbase “MKS” Canable Pro 2.0. The board has different dimensions from both the Canable Pro (not 2.0) and Canable 2.0 (not Pro).
The bracket is designed to be mounted on a VORON Design “PCB-din-clip”, which can be found here:
https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl
It uses two M2 x 8mm or M2 x 10mm self-tapping screws to mount to the VORON clip.
The Canable Board can be secured on the mount either with a small cable binder (there's a groove on the back), or by melting down the locating pins.