CooliPi 4B HAT and FAN mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frames for mounting large HATs and a FAN to the CooliPi 4B heatsink/case combo.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 58
- Makes
- 0
- Views
- 588
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — NoDerivatives
Frames for mounting large HATs and a FAN to the CooliPi 4B heatsink/case combo.
See more info at www.coolipi.com
Shop at www.sensoreq.com
Print instructions
These are mounting frames for a Raspberry Pi model B case named CooliPi 4B CASE, for use with a real aluminium heatsink sold by www.sensoreq.com
If you have Prusa i3 MK3/S, 0.4mm nozzle diameter, you can use the gcode directly. Print material PETG. Not tested with other materials. Exported with 100% fill.
You may use the 3mf project and change any other print parameters, including material, but be aware of the scale factor - thermal contraction may be different.
The parts are increased by 0.3% in slicer because of thermal contraction of PETG after cooling. Fine tune yours. Not critical though. 0.3% was ok for PETG for us.
In other words, gcode has the 0.3% increase in it.
The 3mf project has the 0.3% increase set for this part.
Source STL files are in nominal dimensions.
Print orientation is visible on the pictures. No supports needed.
This is to be used only with a CooliPi 4B CASE with a aluminium heatsink from www.sensoreq.com, or you can print a mockup of that heatsink first, to evaluate its size and aesthetic. It's in the collection under CooliPi 4B heatsink MOCKUP name.
See more at www.coolipi.com . Source files are in Download section in the menu.
Shop at www.sensoreq.com