Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.55 – €5.56 net (excluding VAT)
For file: Raspberry_PI_Sleeve_V.2_0.4n_0.2mm_PETG_MK3S_6h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.06 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 6.03 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 45
- Makes
- 1
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the case by dktosoch.
https://www.thingiverse.com/thing:2844013
The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws.
Happy printing!
If you like this thing leave a like or post a make. I'm always open to suggestions for improvements or changes.
___________
Remix des Gehäuses von dktosoch.
https://www.thingiverse.com/thing:2844013
Das Gehäuse passt jetzt oben an den Prusa MK3S und kann mit zwei M3x10 Schrauben befestigt werden.
Frohes Drucken!
Wenn euch das Ding gefällt lasst ein Like da oder postet ein Make. Für Verbesserungs- oder Änderungsvorschläge bin ich immer offen.