Ender 2 Pro Direct Drive Extruder V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved direct drive for Ender 2 Pro
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 252
- Makes
- 1
- Views
- 2,198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a two-part direct drive replacement for the stock hotend cover. I made this because my previous direct drive project required full disassembly to access the heat sink for maintenance. This new version has all the cooling fans fixed to a removable part. Held in place by two screws.
I'll leave the step file for you to download. Use it as a guide to assassembly. Note that there is a hook at the right of the stepper mount; that's to hold all the cables in place.
The Ender 2 Pro also has a ground cable attached to the heatsink. I added a hole at the back, as shown here.
Print settings:
Material: ABS/ASA/PETG or any high temp material (hotend is hot)
Perimeters: 3-4
Infill: 10%-15%
Supports: No
Feel free to leave any questions or recommendations in the comments, and I'll try to answer them as soon as possible.