1 / 3
Hoppe Door Fiting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for broken door handle bearings
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With these Hoppe door handle bearings, the approaches for the screws tear off after a while.
Print this part made of ABS, ASA, PCTG, PETG or similar as hot and slowly as possible. The hole for the door handle must be slightly larger than 18 mm.
With the sleeve screws (M4x40), the approaches no longer tear off so easily.
Added rosette holder for keyhole.
Printed the parts with ASA and a scaling to 100.5%, then the dimensions fit perfectly due to shrinking. PCTG also works very well.