Replacement Gas Cap Tether for Nissan Frontier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement gas cap tether for the OEM gas cap on a 2014 Nissan Frontier.
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 215
- Makes
- 1
- Views
- 1,142
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There's a few gas cap tethers on here already, but none of them fit my 2014 Nissan Frontier. So I modeled up one compatible with that vehicle.
I'd lost the original plastic peg that held the tether to the door so I designed this one to be press-fit into place. Fit and retention force seems good. However, I did include a STEP file if anyone wants to change the press-fit back to the original ring design.
This should be printed in a TPU or a similar flex material. I have not tested, nor do I suspect it will work well, in a rigid filament.
Compatibility:
As mentioned this is for the OEM gas cap on a 2014 Nissan Frontier. If you suspect it might be compatible with your vehicle based on general appearance I'd check these two measurements:
- Inner diameter of the gas cap ring = 60mm
- Diameter of the hole on the door = 4.75mm
Here are the print settings I had success with:
- 0.2mm layer height with a 0.4mm nozzle
- 4 bottom layers, 5 top layers, 4 perimeters
- 15% infill
This does not need any supports.