1 / 2
Ender 3 + Ender 5 (Regular and Pro) Display Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
(Yet another) stand to hold the Ender screen, letting you move it to the front of your printer.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 113
- Makes
- 1
- Views
- 653
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The display is at a fairly steep angle to allow clearance behind, in case you've relocated your print bed. The back of the display's IDC socket (i.e: not allowing for the IDC cable) is only 20mm inside the frame.
Extra parts required:
- Two M5*8 bolts (slightly longer or shorter probably OK, too)
- Two M5 T-Nuts
You'll need to assemble it in this order:
- M5 bolts and T-Nuts
- Screw into frame
- Put in display, and screw in display
- Add knob
Notes:
- I printed it with what Cura calls “supports everywhere”, as the guide “bump” has a bit of overhang otherwise.
- You'll may need to buy or make a longer 10-way IDC cable, since you're moving the display.
- If you lose track, like I did, it's the “EXP3” connector you use on the display for the Ender 5 Pro (and likely the same for other Ender 3 and 5 models as well.)