Mounting Wedges and Pads
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Self-locking Bended Mounting Wedges
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 117
- Makes
- 1
- Views
- 550
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Mounting Wedges:
For work such as laying floors and for other applications…
Self-Locking: 🔒🔑 Works with each other when used in pairs, but the wedge will also work well alone.
Bended: ➰ Works as a compression spring and secures the wedge in position (For example if you work near the wedges with a hammer and cause vibrations, the straight ones will immediately loosen without pressure).
Dimensions: 📐Width: 35 mm, Lenth: 59 mm, Height: 6 mm
Maximum spread in a pair: 10mm
Print Settings: 🖨⚙
Filament material: PLA, PETG
Layer height: 0.3
Infill: 30%
Print speed: Up to 30mm/s (Keep low, for good printing of small teeth)
Print Orientation: As it is in STL files
Supports: NO
Mounting Pads:
Height of pads: 1, 2, 3, 4 and 5 mm
For precise height, print pads with layer height: 0.25 or 0.2 mm (for layers counting)