Badger Airbrush Paint Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand for Badger 30ml airbrush paint bottles. Prints without supports
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 214
- Makes
- 0
- Views
- 980
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Description
A stand for Badger 30ml(1oz) airbrush paint bottles. It was designed to fit 30mm round bottles snugly, but with enough clearance to easily remove them. There are three versions of the stand with one, two, and three tiers respectively. Each is 240mm wide, designed to fit the Prusa MK3 and MK4 build plates. Each tier fits seven bottles across.
This is my first attempt at a design and I am new to both design and Fusion 360. I am planning to improve the design over time, reducing material use and print times. In addition, I am planning to make modular versions, as well as wall mounted options.
I'm open to any suggestions or thought around design. This is very much a learning experience for me.
Print Settings
I printed with the .2mm SPEED profile for the MK4 with input shaping with a .4mm nozzle. I would think that a higher layer height, especially with a .6mm nozzle would be structurally fine and definitely faster.
Layer Height: .2mm
First Layer Height: .25mm
Perimeters: 2
Solid Layers: 4 (top and bottom)
Fill Density: 7%
Fill Pattern: Adaptive Cubic
Updates
October 11, 2023 -
- Updated dimensions slightly, reduced filament use by 28 grams and reduced print time by 65 minutes with the same setting. Each tier is slightly shorter and narrower. Still seems strong enough to me and still seems to hold the bottle in place well.
- Unified naming convention to indicate versions using Mk<x> standard.
- Mk3 = original published version
- Mk4 = slightly smaller version for improved material use and print time.
- Added .step file for Mk4 version