Apartment's magnetic shelter / MAMAD door locker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The model is used to lock the apartment's protected room / shelter room / MAMAD door from inside.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 703
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
With the latest events in Israel I had to print something so we can lock the apartment's protected room / shelter room / MAMAD door from inside. I upload it here so anyone who needs it can print it as well and feel more safe.
The part should be printed with no support and brim on auto.
Printing with PLA and 15% infill it will not be strong, if you want it stronger increase the infill above 25% and use ABS or ASA. Note that it will then be heavier so you will have to glue stronger magnets in case you want to store it on the door top like I did.
Current magnets holes are for 8mm x 3mm magnets, the magnets are not a must it's only for holding it on the door, you can still use it to lock the door without them.
hope you find it useful, I share it with love, stay safe !!!