1 / 3
Plug for WBX TDC sensor hole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is designed to plug that hole in your WBX case that is left if you remove OEM TDC sensor.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This plug is designed to be used to plug the hole in your engine case, left when you remove OEM TDC sensor.
Dimensions are so that it needs to be hammered in and it stays in place good. Friction fit.
BUT SINCE IT IS DESIGNED TO BE INSTALLED FROM FLYWHEEL SIDE! I RECOMMEND YOU TO USE EPOXY GLUE JUST IN CASE!
It goes with out saying, use this design with your own consideration.
Use filament that can stand oils and higher heat.
I used Polycarbonate. ASA and even PETG should work as well :)