1 / 2
Voron 5 inch display mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for DFrobot 5" TFT or PITFT 50 display
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 122
- Makes
- 0
- Views
- 1,266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
Many mounts for 5" touchscreens have already been designed. This design however also includes a front piece for the display, such that the ugly edges aren't visible. I use a DFrobot 5" display, but I believe the PITFT 50 is the same.
How to use
- There are 8 screw locations. Screw in two at the center top location of the display. They should be in about 50% and will be used to slide-lock into the mount
- Attach the skirt mount to your printer
- Place the display inside the cover and use the locks A and B to secure
- Connect the dsi cable to the display and through the hole in the skirt
- Slide the display onto the skirt bracket. You might have to adjust the screw a bit.
- Screw in the two center bottom screws.