Carbide Insert Corner Glue Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is inspired by Woodpeckers Mighty Mini Carbide Insert Glue Scraper.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 110
- Makes
- 0
- Views
- 772
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This model is inspired by Woodpeckers Mighty Mini Carbide Insert Glue Scraper ($31). You can purchase the insert on AliExpress.com - just search for "Wood Carbide Insert Milling Cutter". This will cost you about $2 (free shiping to some countries).
The handle is designed for 14-15 mm (9/16 - 19/32 inch) inserts. 16 mm (5/8 inch) would fit too.
You will also need a holding screw. I recommend using undersize screw, so different size inserts can be moved up to lean against the upper ledge.
You may need to modify the model depending on what screw size you are going to use, and if you are going to use threaded insert. You can also use drill to enlarge hole post-printing. The hole in the model is 5mm (diameter) x 9.5mm (length), then 4.5mm (diameter) x 16mm (length).
Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: No
Supports: Yes
Resolution: 0.3
Infill: 20
Filament: Filamentarno ABS Black
Notes:
0.5x0.3 layer, 6 tops, 6 bottoms, 6 shells. Support is required for cavity on the side. Consider using brim.