Plain lid riser for BambuLab X1C and P1S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lid riser to add more clearance for PTFE tubing.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 288
- Makes
- 1
- Views
- 2,593
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a plain lid riser for the Bambu X1C and P1S. I don't care for how the ptfe tube rubs (and wears down) against the glass in my X1C and wanted to give it some more space to move. There are other risers that include vents or slots for LEDs but I personally have no need for that.
For a gasket against the glass I used adhesive-backed neoprene strips (example: https://www.amazon.com/dp/B0BFHD88TV?ref=ppx_yo2ov_dt_b_product_details&th=1). If you go this route be sure to cut out a small section for the screws on the lid handle, similar to the stock gasket material.
For assembling, just match the numbers up.
Recommended print settings:
* Material - PETG or other filament with heat resistence
* Layer height - Doesnt really matter much, I used .2mm just to save some time
* Wall loops - 2
* Infill - 15%, gyroid