1 / 5
FPV cam + transmitter case with strap-mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a 1500TVL B19 fpv-cam + TX2500 fpv-transmitter to fix onto backpack-straps or poles
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Use Case:
This case is meant to be used with a 1500TVL B19 fpv-cam and a TX2500 V4 fpv-transmitter.
It can be secured to the strap of a backpack or a pole to make a portable or stationary fpv-cam streaming/surveiliance setup. It is powered with an external battery pack.
Material-List:
You will need the following Materials:
| 1 | TX2500 V4 Transmitter |
| 1 | 1500TVL B19 fpv-cam |
| 1 | Four Leaf Clover Antenna (Red Inner Hole) |
| 2 | 20mm Velcro Strap |
| 4 | Screw M2 x 20mm |
| 4 | Nut M2 |
Assembly:
- Print the two parts of the case, clean them of stringing if necessary (scalpel or heat gun).
- Insert the Camera, screw it in with the screws that come with it.
- Wire up the connectors of camera + transmitter according to the instructions on the transmitter AliExpress page (add power wires to go to the expternal battery pack. I soldered a XT60 connector to the end)
- Connect the connectors to camera + transmitter
- Insert the transmitter
- Feed the power cables through one of the holes in the case, fixate them with hot glue
- Push the screws through from the front
- Feed the two velcro straps through the pack plate
- Put the back plate on and screw it down using the nuts