1 / 2
Fox Seal Driver 34mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Driver for the Fox34 dust wiper seal.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 279
- Makes
- 1
- Views
- 977
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Suitable for Fox 34 Forks
Print with the "hammer face" on the buildplate without supports.
Sand the cylindrical part that slides into the fork, to prevent damage to the new seals.
The top part which gets hammered needs around 50% infill and 5-6 top layers.
Cylindrical part which slides into the fork can use a lot less infill, so if you want you can use a modifier on this part. (See attached Prusaslicer file)