Laser cutter material clamps. Parametric design for different sheet thickness. Magnetic. Thin for clearance.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thin strong magnetic bed clamps for laser cutting to avoid material warp
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Quick to print and parametrically designed clip to house a magnet for holding material down on laser cutter beds. These are designed to be super low profile so they avoid collisions with focusing probes. Do check your own clearances though as obviously everyones machines are different.
I cut tons of 4mm thick sheets every day and use these to keep my material flat as it can sometimes warp slightly.
I print them in petg with the strong profile on Bambu slicer which is 6 walls. Total overkill and not required.
Magnets can be glued or screwed in depending on the type of magnet you have. I tend to just glue them in for ease.
the version here is designed for for the magnets I use which are 32mm x 5mm but ive included the step file so you can change the parameters in fusion360 for your own material thickness and magnet dimensions.