Creality Sprite Extruder Pro - Filament Runout Sensor Case for MMU2s
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament Runout sensor case for Creality Sprite Extruder Pro to be used with MMU2s
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 165
- Makes
- 0
- Views
- 2,297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a filament runout sensor holder for Creality Sprite Extruder Pro. I designed it to be used with MMU2s. So, my design goal was to keep the trigger as close to the extruder gears as possible to replicate the Prusa MK3S+ design which is triggered when the filament reaches the gears. I've been testing this for a while now and it is running beautifuly.
This is a single part and it requires a color change so that you can insert the Micro switch. For micro switch I used these https://amzn.to/3tXhQex (this is an affiliated link).
I also include the FreeCAD file (which also includes my previous design)…
In my current setup I connected the NO (Normally Open) with the signal channel for convenience when soldering the JST-XH port. So you might need to update your Marlin config and set the FIL_RUNOUT_STATE to HIGH (which is the default) in your Configuration.h, otherwise you need to connect the NC (Normally Closed) if you want to keep the FIL_RUNOUT_STATE as LOW.