JC-Creality K1 Lid Riser LED Spotlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added a floodlight on the corner of the riser.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 77
- Makes
- 0
- Views
- 1,671
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I used a led spotlight leftover from another project; 24 volts, 120 degree angle, warm white, 25mm: https://www.aliexpress.us/item/3256803619896206.html?spm=a2g0o.order_list.order_list_main.89.469c1802ZuKBM4&gatewayAdapt=glo2usa4itemAdapt
I had warm white leftover, but cold white or just white will probably give you a more natural color. Wires can easily be split in the wires going to the led strip, no need to do anything eles electrically. One spot only uses 1 Watt, I have seen some guy plug in about 25 watts of extra led strip without issues.
I have only installed one so far but you can put them on the other corners as well to create something like stadion lighting.
Needs to be printed with supports, most damaged surfaces you will not be able to see when it installed anyway. The slot is to feed the cable back down and enables you to put the light in the part when the wiring is already connected. I included the .SLDPRT for whatever good it will do you, it was kind of a sloppy job.