Thrustmaster T16000 Rig Holder // Mini Table for Sim Rig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I am using my Sim Rig not only for Sim Racing but also for Flight Sim, like Elite Dangerous for example. Unfortunately…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 30
- Makes
- 0
- Views
- 1,152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I am using my Sim Rig not only for Sim Racing but also for Flight Sim, like Elite Dangerous for example.
Unfortunately the flight stick was always a bit to near to my shifter so I always hit the Flightstick while I was shifting....
Furthermore I need a place where I can lay down my Controller :D
So I decided to create this mini table on the right sight of my Rig to move the Flight Stick.
As you can see on the pictures its created very simple without any extra features.
Yes I know the Print is not the best as I only printed in Draft Mode. Thats because this is a "use" Item not a "look nice" Item.
So feel free to print it in higher quality. :)
For the Screw Holes I used M5 Screws and Nuts nevertheless Holes are big enough for M6. For the Thrustmaster you will need M6 Srews to fix it on this plattform.
Beware: This is designed for 40mm Aluminim Profile. For other Profiles this needs to be adjusted.
Obviously I designed it as a two part Item, as the Anycubic can not print higher values than 20 cm. ;)
Print Settings
Printer:
Anycubic Mega S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,3
Infill:
10
Filament:
Geetech PLABlack How I Designed This ===================
Category: Video Games