The Screen Thing - A Screen Holder to Make Your DM Screen Stand Up Perfectly!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Does your DM screen flop around haphazardly? This simple spool-finishing print will fix that!
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 104
- Makes
- 0
- Views
- 1,138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
WHAT IS IT?
I don't know what to call it, that's why it's called “The Screen Thing!” It's a little bracket that holds your DM screen at a perfect angle so it can't flop around. Print enough of these to fit all the bends in your DM screen, slip them on, and your table will look a lot neater!
There's a 2.5mm gap for the screen to snugly fit inside. If your screen is significantly thicker or thinner than that, I suggest you scale this model in your slicer!
NO ADDITIONAL HARDWARE NEEDED
MY PRINT SETTINGS
This little guy can be printed just about however you like. I printed mine at 20% infill at 3 walls. If your screen is super thick or super thin, you may want to scale the model up or down in your slicer.
…why yes, I did just lay a cheap TV on my dining room table to play D&D…