The Screen Thing - A Screen Holder to Make Your DM Screen Stand Up Perfectly!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Does your DM screen flop around haphazardly? This simple spool-finishing print will fix that!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
WHAT IS IT?
I don't know what to call it, that's why it's called “The Screen Thing!” It's a little bracket that holds your DM screen at a perfect angle so it can't flop around. Print enough of these to fit all the bends in your DM screen, slip them on, and your table will look a lot neater!
There's a 2.5mm gap for the screen to snugly fit inside. If your screen is significantly thicker or thinner than that, I suggest you scale this model in your slicer!
NO ADDITIONAL HARDWARE NEEDED
MY PRINT SETTINGS
This little guy can be printed just about however you like. I printed mine at 20% infill at 3 walls. If your screen is super thick or super thin, you may want to scale the model up or down in your slicer.
…why yes, I did just lay a cheap TV on my dining room table to play D&D…