Automatic Shutter Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a container that uses springs and a damper to slowly open a shutter.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 50
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is the slow open shutter container.
See build instructions PDF for assembly help.
You will need the following supplies:
Pin List:
-3mm Dia. 135.5mm long(QTY.4)
-3mm Dia. 159.5mm long(QTY.1)
Screw List:
-M3 x 20mm long Socket Head Cap Screw(QTY.2)
-M3 x 14mm long Socket Head Cap Screw(QTY.6)
-M3 x 5mm long Socket Head Cap Screw(QTY.2)
-M3 x 4mm long Set Screw(QTY.10)
Other Hardware:
-Rotational Damper(QTY.1)
-Constant Force Spring(QTY.2)
-Rubber Feet(QTY.4)
Supplies Links:
-Constant Force Springs (LCF 025 04 025S)
-Rotational Damper (FRN-C2-R301)
Print Settings:
I printed all the parts out of PETG at 0.3mm layer heights.
No supports required for any of the printed parts.
Your printer will need a build volume of at least 180x180x200mm (200mm z-height)