Counting matching models…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
This is my Print in place spring loaded box design! No supports, no assembly, just print and use! See it in action here: https://youtu.be/IrT1DaSBeQ4 All clearances are 0.3mm or greater, so most household 3d-printers should have no…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
I needed something to keep the door shut on the package drop box so I designed this spring loaded slide bolt catch that Prints-In-Place as a single assembly. It's spring loaded so it automatically latches when you close the door. I…
Hey everyone, Bear here! I was never really satisfied with the flimsy case my hex bit set came in, so I took matters into my own hands and designed my own! What started as a simple storage solution evolved into a fun, fully 3D-printable,…
This is how it works: Numerous modifications have been made to achieve a higher chance of a rolled Six. First, the side opposite the Six (One) is fully filled and therefore heavier than the other side. Second, the edges on the One side…
A funnel for Gravitrax that allows the ball to move slowly and smoothly. I've been working hard to add more practical entry points, and I'm really happy with how it's turned out. The entire funnel is held up by three rings attached to…
An easy to print and use clip for keeping plastic bags closed inspired by those hoodie drawstring clips: Print instructions: Print in the orientation the STLs are imported Use supports - tree (organic) supports work perfect Use at least 3…
In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…
The source marked this model as adult content.
A remix of Denste17 's bike mount, which is also a remix of Florian Z's (Weberflo) Multihalter für Thule Chariot . My remix is based on another remix by Philipp Unstoppable (allXages) who added a PLA Version . Denste17's Mount…
I present the spring loaded Coffee/Espresso tamper gadget: easily compact your coffee grind with your own assembled tamper apparatus to make your espresso with style! Available for 49 - 58 mm portafilters. The handle, spring holder and…
This spring-loaded gift box closes using an irising mechanism. Perfect for giving gift cards, candy, or other 3D prints to your loved ones around the holidays. I used this model this year to make giving gift cards a bit more fun. Though I…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
I made this stand for the purpose of being able to store my gun in my bedroom gun safe or on your night stand loaded and ready if something is happening during the night. The stand allows you to store your Glock with a full magazine and a…
* Measurement scale was few mm off, fixed now (pad_fixed.stl) * I reworked my previous model - improved slider, easier to read scale, better tolerances. Foot measurements are possible now in both centimeters and inches. Print settings:…
A carabiner with a spring loaded locking mechanism. My first 2 versions of a locking carabiner was with a screw, but it took too long to open and close. As these plastic carabiners are not ment to handle large loads like of a person, the…
This sleek obelisk of a case has virtually no discernable features on the outside - no visible buttons or latches. But just squeeze the sides together at the business end, and Sproing! , out pop your glasses. Then just push the case back…
This an Airsoft Spring Loaded BB pellets grenade. 67 x 94mm For maximum spreading performance, load it with 50 to 60 BB (30 on each side max) Printed in PLA matte Sunlu 0.2mm layer height 0.4mm nozzle 4 Walls Thick 20% Infill Support…
I liked the model by Chris, but I wanted it parametric so I could make one for some huge Go Fish cards my kids have. Getting from the STEP file provided by Chris (which is much better than STL, thanks Chris!) to a parametric model was not…
DIN rails are cheap and awesome standardized mounting solutions. This ratchet has a spring loaded DIN rail mount mechanism which makes it useful to arrange cables under the desk or anywhere else where you can attach a DIN rail. This…
What it is: This is an RC airplane wheel with spiral spokes, capable of absorbing some of the landing impact. To satisfy a broad range of applications, I made four different rim types and five different tire shapes (all interchangeable);…
This is a toy, spring-loaded catapult, designed to be 3D-printed. catapult spring loaded print-in-place (+40m m range) - Makeronline - More Than Fun It features an intricate, lattice base and arm structures for lightweight, strong…
This is work in progress next update will be adding an NTC for more safety. Edited 19-12-2022 : added a little how to and some Data, Features & Technical Specs After multiple prints and test I finally came with a design that I'm satisfied…
Soooo I need to change the wasteboard bed on my CNC and changing the layout to something a bit better for me so I need to plot the work area. There are lots of options but I wanted to use a sharpie and wanted to be straight up and down…
This is a spring loaded alternative to the buffers I have used for my other Gauge 1 models. Salvage a spring from a ball-point pen and fit it to the buffer with a M2 screw. You need to drill out the screwthreads in the bufferbeams to…
v1.1 - added step files, go nuts Miss loading physical media into some kind of slot to launch a game? And then pressing an eject button to swap to another game? The solution is here! Using the TapTo project , this case can be paired with…
The plastic spring used nowadays by LGB to push up the coupling hook deteriorates over time. These sagging hooks result in spontaniously unhooking of wagons in your trains. This is my attempt to fix this by using a spring salvaged from a…
Matessss! My apologies for the lack of response and the measurement error. I'm uploading the file again in STL format so you can download it without any problems! Greetings, Makers
Shoot frozen peas or other small items with your ring catapult. No support needed. Ring sizes available: (ID=Inner diameter) 16mm 18mm 20mm 22mm 23mm 24mm If you want another size, please comment and i will add a new stl file.
Summary Full printability without the need for additional components like rubber bands or springs. THE
Designed for my brother to paint minitures printed with his resin printer. A miniture painting handle inspired by a few previous designs and then built upon. Required: M6x80 - M6x120 screws and bolt - depending on the model size you are…
Do you need a door stopper that is easy to use, durable, and adaptable? Then you might want to try FlexiStop, the parametric door stopper that features a spring loaded arc to keep the door open. FlexiStop works like a traditional wedge…
Enclosure of back-loaded horn speaker inspired from Klein bottle. It is designed for 50mm (2inch) speaker unit, but it can be easily scaled up or down. Easy to print without support. The dimension of the enclosure is 182(D) x 112(H) x…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Motivated by the business card case design by @LoboCNC , and thanks to LoboCNC's…
Everyone wants a custom wheels for this MP4/4 Lego set are same reason… However, I can't found a after market parts, so I carry on my first try. Project characteristic Blender based project. Referenced to a lot of MP4/4 public source. My…
Just use a 60 degree 0.3mm tip engraving v-bit and a ballpoint pen nib.
In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…
All the parts can be printed without supports, and can be printed in PLA. I suggest only the “latch” to be printed in PETG or ABS for increased strength, but it also works in PLA. This project requires some additional hardware: PINS n.3 ⌀…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This is the perfect toy to fidget with when you are bored, it makes a satisfying sound when you use it. It is also great if you want to prank your friends, just put the finger down, lock it, and unlock it infront of them. It is great…
Updates: (8/30/23): Added open/closed double-wings versions, which some people had requested because they found the clip tilted in unevenly wound spools. Also added a mostly cleaned up Fusion360 and STEP files for these variants (in case…
A vinyl cutter attachment for a 3D printer needs to have two key features: Spring tensioning to compensate for bed level issues (You can never get a 3D printer bed as flat as a Cricut or Silhouette cutting area) A very snug fit for the…
Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…
Version 2 of the “ Thule Stroller Flag Holder reloaded” ! An additional slot has been added dedicated to the extension rod provided by Thule. It is very much recommended to use the extension rod in order for the stroller to be more…
Business card dispenser with 3d printed spring. Load from bthe ack, dispense from the front.
I will use this battery holder to charge my batteries using 4 x TP4056 or you can use 2 x TP 5100 I wanted to be strong and reliable so I print it in Sunlu Black PETG with : 0.4 nozzle 0.2 Layer Height 4 Perimeters 5 Top 5 Bottom and it…
This is a spring-loaded latching mechanism for a broad variety of applications. It is inspired by a slam latch (normal door, some car doors etc.). However, you CANNOT slam this one. You need to press the pins to release the connection AND…
Hardware required includes: x1 “Regular Size” Fine-Point Sharpie (Any color works) x1 Compression Spring x4 Socket Head Cap Screws
New version 2 of my duct is live, I have adjusted the spacing where the heatsert goes and closed the front. The fan should fit snugly onto the colums where the heatserts sit. Then you use 2 m3x16 BHCS to secure the fan. Much cleaner and…
As part of my ongoing upgrade of my A8 Plus, this is a clamp for the X-axis belt on the carriage. This replaces the stock (rather poor) part with a solid one and removes the tensioning facility in favour of an external tensioner (which…
This model is a clip probe for electrical measurements. It uses a piece of copper wire (0.8 to 1.4mm diameter) and a spring (up to 8mm diameter). A pen spring works well. Follow the illustration in the pictures to bend and install the…
It is a loaded dice. You have to pouse the print and add a nut into the dice for changing the gravity center
For details please see the original model @ https://www.printables.com/model/Parametric-Cable-Grommet Added a top disk stopper as I needed to use this in vertical orientation. Just use any contact adhesive (glue) to secure it to the top…
Most of the K1 series use magnets to hold the door closed. However the K1 SE doesn't come with a door or cutouts for magnets in the frame so it needs a different solution. This mounts to the back of the handle and holds the door shut with…
Requested by someone, you can make all these changes and your own remix by using the original files and changing up the specifications (per instructions) in FREE* onshape account.
MMU3 Chimney Modified for PC4-M10 Fitting and Spring Loaded Sensor Adjustment. I used the M10 fittings with my MMU2 because it made it easier for maintenance so I made this for the MMU3. I also loved the idea of Cdbugess's spring loaded…
This spring loaded guitar pick holder holds up to 2 - 3 medium gauge picks (capacity varies by pick size) and includes a loop to make it easy to attach to a string or necklace. The built-in printed spring helps keeps the picks secure so…
Magazine for Diana pellet guns. Should fit the models: Trailscout, Stormrider, Bandit and Chaser. I tested it on a Diana Trailscout. The magazine fits seven 4.5mm rounds and uses a 6x18mm spring for tension. On the bottom is a slot to fit…
I designed this holder so that I could trace the outline of a part and check clamp clearance on a CNC Mill. I didn't like the idea of using a balloon as a spring and wanted to design something that was mostly 3D printable. The top has a…
About I've tried filament clips that attach to the spool and they're not bad but each spool is different so it's difficult finding a universal one that works well. You could also use the holes in the spools but it's not a great solution…
Update 2025: I just uploaded a Version 2 of these and the Step file if anyone wants to make changes to them. Update: Just added some alternative feet for those that would like to angle the speakers back, also added 2 mock-up 3D files so…
Description This is a fully 3D-printed spring latch mechanism that locks and releases a sliding part (the "slider") using a printed spring and a clever hook system. When you pull the spring-loaded hook, the mechanism unlocks, and the…
This is the final design of my spring loaded lock mechanism. Compared to the previous version (V1.4), the following improvements have been made: Redesigned the spring to be symmetrical, so there is no longer a specific mounting…
This is self scratching station for cats to rub up on. The base plate mounts to any surface a Command Adhesive strip can stick to. First you fill the scratcher from the back, then slide on the mounting plate, and stick to a surface. I…
Video Need to add a spring - use the washer for optimal tension when cocked. scale for thicker walls - or use the script
[Disclaimer] [FR] Je décline toutes les responsabilité dans le cas où l'utilisation d'un dé pipé Pilote NEXUS serait découverte lors d'une partie de jeu quelle qu’elle soit. [EN] I accept no responsibility in the case where the use of a…
Inspired by the use of springs in 3D Printy's model https://www.printables.com/model/155771-wall-mounted-cat-toy but not wanting to spent too much time attaching it to a wall, I spent hours making a clamped version. Our cats love the…
REPAIRED correct files loaded scaleable and easy to print
Want to add some extra excitement to your board games? Well, here you go: a Dice Tower with a spring loaded Trapdoor! This is a very simple print, and all you need is a printer, a 4mm(ish) pen spring, and a 20-25mm M3 bolt. The bolt is…
update: this model was apparently deleted from thingiverse, so this is the only place to download this model. Don't forget to post a make!
Original based at work from “hve2019” (https://www.thingiverse.com/thing:5354110). I added for people w/o SCAD skills: Main body: with inner hole 2.85 mm, original has 3mm, but in my test prints, the mounting with a M3 screw wasn't tight…
This is an optimized version of the V1 spring loaded lock mechanism. The following improvements have been made: Shortened the overall package Added some fillets and chamfers to the design Added another stop block (retainer) for the spring…
I printed the original print but was disappointed with the mechanism so I redesigned the whole thing to be spring-loaded Printed with a 0.4mm nozzle Printed on 2.5mm layer height Printed with no supports Printed with 15% infill You should…
Originally, this was an idea taken from the radiator hook design by ramhofer on thingiverse. Thanks for the inspiration! The current version 2 is a complete redesign. It is a litte wider and uses spring load tension to stay fast for a…
Designed a magnetic connector for a 3 pins spring loaded pogo header from millmax. https://www.mill-max.com/products/socket/854-xx-xxx-10-003101 https://www.mill-max.com/products/socket/858-xx-xxx-10-001101 You will need to assemble…
Plate loaded kettlebell I designed. Utilizes a 1" bolt and printed spacers to adapt and use both 1 and 2 inch hole plates. Handle printed out of CF PC. Base and spacers PLA+. Handle might be able to be printed in PLA but I didn't want to…
This is a remix of Greg191134's thing 2186253 I moved the filament guide closer to the thread to reduce filament bending, relocated and strengthened the holes, strengthened the cable guide and some other minor changes to make it fit…
I designed this unit to make a suction system for my lab and I've chosen a multi tube system. Picked up 40mm (OD) drainpipes (with integrated rubber gasket) and connected to chinese cyclone through this unit; my dust collector is a 700w…
The Prusa XL comes with a few M4nEs drop in T-nuts which are very handy. I needed some more to attach accessories to the frame. These T-nuts roll into the extrusion and the back arm pushes the T-nut perfectly into place so it makes it…
Find version 2 of this model here ! It includes a second slot for the flag extension rod. If you are also annoyed by the position of the flag mount on your Thule Chariot (gets in the way of the handle if you want to flip it) then this…
This is a smaller version of “https://www.printables.com/model/77594-sd-card-grip” because the original one does not work with the cr-10 SD card slot. This works great for the spring-loaded holding SD card slot.
This is an optimized version of the V1 spring loaded lock mechanism. The following improvements have been made: More mounting points (also reduced their length) Improved the design of the spring orientation dot Added a hexagon cutout…
Hey I am still working on this model so feel free to print the files and give me feedback on how to improve the design. I have so many cables on my desktop and I wanted them to be more accessible and organized so I designed this cable…
I made this double-digit counter for keeping track of my life when playing commander, but it can of course be used for other purposes. The counter consists of two wheels with the digits 0-9. Each wheel is paired with a spring that locks…
Сable holder for 16mm thick worktop. For your convenience i have posted the file so you can resize it to your needs
I small change to the clicker to allow it to give even more of a tactile feeling.
This design allows for an adjustable low profile floating dust shoe, which is intended for use with the OpenBuild Cnc's. FreeCad files have been provide to allow you to make modifications for additional dust collector options or to…
My toilet paper holder was old and broke, so I set out to make my own and this is the result. I tried to keep the design simple, easy to print, and easy to put together. It uses 2 M5 25 bolts and 2 M5 hex nuts to hold the spring loaded…
The OD of the original spool shaft is 7.95, so why not? Bearing: 608RS*2 Pros: ·Compatible with spools with an inner diameter of 50mm to 55mm. (I measured several filament spools from different brands I own) · Compatible with spool up to…
If you print w/out fixing the 'errors' and 100 infill, you will have a loaded die, If you fix the ‘errors’ in the print you will just get a plain old fashioned die.
i made the dice hollow but for the one, making your chance of rolling a six higher. the more infill the better.
I designed a shell speaker for 1" full range unit, e.g., Aurasound NSW1-205-8A. Full length of the horn is 575mm. You can enjoy the bass sound created by this unique speaker. Speaker mount is provided as a separate stl file. So, you can…
In addition to the original BOM, you will need two compression springs, a few M4 screws and nuts, and M3 square nuts (optional).
This is a small spring-loaded missile launcher based on my printable spring design The design doesn't have a trigger, there's a small hole in the back of the launcher you can tie any thread or wire to and pull it down to fire (the reason…
Spring loaded propeller, with some gears to generate a transition. In the name of every file is written, if you have to print it two times. Press, slide and hammer the parts together, they should have a nice fit.
this is a bag clip with a spring-loaded latch for security. 0.3mm of tolerance. print with 3-4 perimeters 25-30% infill, no support PLA+ or petg the hook should be free after removing from the plate, the bigger pivot will break loose with…
Compact euro coin dispenser for 3D printing. Designed for coins from 10 cent to 2 euro , each value has its own vertical slot with a spring-loaded pusher so the coins are always ready on top. Perfect for cashiers, market stalls, events,…
We have improved the design using Springs to have a better grip on the spool and to be easier to load and unload the spool in to the holder. + added a “3th” wheel for better support that can be adjusted for wider spools. this offers…
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![#0179 [UPDATED] Automatic Paracord Tensioner for Clotheslines [spring loaded, for 4mm cord]](https://media.printables.com/media/prints/962702/images/7581598_122262e0-2234-49ee-be2c-d0307a9276db_a2d9492a-091a-48f9-9736-3e0258748626/rl-20240819-011.jpg)
![#0114 [Remix] Business Card Holder <Spring Loaded Card Ejection>](https://media.printables.com/media/prints/665593/images/5286655_cb879090-431c-4fb4-b015-f0fdae30c873_ec75e7ce-cfda-4ebe-b19e-42802fe37971/20231206_224503.jpg)
![[EN] Loaded Die ! [FR] Dé pipé ! [CZ] Nabité kostky ! [DEU] geladene Würfel](https://media.printables.com/media/prints/87073/images/925594_a96c45bb-cf85-4ee7-93cb-90db098333be/de-pipe.png)
